play button trash

SB06 Synapsev3.4.0 (2015-10-05)

Synapse Version 3.4.0 contains the following changes from Synapse Version 3.02:

  • Added motor electronic speed control (ESC) temperature alarm
  • Added recording of configuration settings to datalog files
  • Added monitoring of I2C and CAN data bus faults
  • Added indication in the on screen display to designate between landing and RTH landing states
  • Added support for major.minor.release version identification
  • Added a feature to record a data log file when no GPS date is available
  • Changed the Arm Enable switch to the Disarm Safety switch and removed motor starting lockout from switch function
  • Changed the minimum Velocity and Climb Rate Clamps speed to 0.25 meters per second
  • Changed default Vertical Stiffness tuning value to 11
  • Changed default Yaw Stiffness tuning value to 85
  • Corrected the reporting of negative (western and southern) latitude and longitude values
  • Corrected an issue where the data log would not write fully following a disarm command
  • Corrected an issue that incorrectly reported an error during firmware updates
  • Corrected an issue where Maximum Range and Maximum Ceiling values would revert to 0 during firmware updates
  • Corrected an issue where changing settings in the ALTA App would infrequently result in accelerometer errors
  • Corrected an issue where applying the default configuration would remove autodeclination

ALTA App Version 1.1 contains the following changes from ALTA App Version 1.0:

  • Added Synapse Firmware update feature
  • Added Synapse Version 3.4.0
  • Changed Arm Enable switch to Disarm Safety switch
  • Changed checklists to reflect new guidance in the Aircraft Flight Manual

See attached PDF for full details about this service bulletin.

Still need help? Get in touch with our support team.

Contact Us