SB03 WiFi Antenna (2015-09-03)

Freefly recommends affected Alta operators to reroute the WiFi antenna through the opening in the GPS/Compass module used for the main wire bundle. A kit containing threadlocking compound, silicone sealant, the required hex driver, zipties
and replacement cover plate screws is being sent to affected Alta operators.

Affected Altas without the SB performed are suitable for flight.

If you see a small antenna hanging down from the GPS module on your Alta, please contact support@freeflysystems.com to request a kit to update your setup.

See attached PDF for full details about this service bulletin.